Wall sandwich panels SFPU from KAMARIDIS GLOBAL WIRE SA

Thickness 30-40-50-60-80-100 [mm]

Width 1000 [mm]

Insulation: polyurethane

Description

(Thermal insulating polyurethane panels for side-wall cladding)

The thermal insulating Insotherm SFPU panels of KAMARIDIS GLOBAL WIRE SA are complex, self-supporting structural elements, especially designed for sidewall cladding, construction of internal partitions and suspended ceilings.

The Insotherm SFPU panels consist of two formed metal sheets and insulation of self-extinguishing polyurethane resin.

The standardized metal sheets of the panels are slightly formed from pre-painted steel in 0.40mm, 0.45mm and 0.50mm-thick sheets with corrugations 50mm-wide and 1.5mm-deep at distances of 50mm. The special forming of the male-female panel ends, in order to interlock during fixing, provides the panels with full tightness and increased thermal insulation, without the need to protect the joint with additional sealing materials.

The Insotherm SFPU panels are supported on the building shell via concealed fixing.

Insotherm SFPU cross section type Α

Insotherm SFPU cross section type Β

Insotherm SFPU joint

Insotherm SFPU Loading Table

PANEL THICKNESS	METAL SHEET THICKNESS
		SINGLE SPAN purling spacing (m)					SINGLE SPAN purling spacing (m)
		2,00	2,50	3,00	3,50	4,00	2,00	2,50	3,00	3,50	4,00	4,50	5,00
S (mm)	t (mm)	МАКСИМАЛЕН КАПАЦИТЕТ НА РАВНОМЕРНО РАЗПРЕДЕЛЕНО НАТОВАРВАНЕ В daN/m²
30	0,50 / 0,50	147	78				194	122	73
30	0,60 / 0,60	158	84	53			211	131	78
40	0,50 / 0,50	196	140	93	57		294	186	127	90	64
40	0,60 / 0,60	211	150	100	61		306	201	136	96	69
50	0,50 / 0,50	221	172	127	86	64	377	250	175	131	93	64
50	0,60 / 0,60	235	183	136	92	69	392	274	188	141	100	69	53
60	0,50 / 0,50	265	216	167	118	88	451	314	225	176	127	78	59
60	0,60 / 0,60	284	235	178	125	94	470	331	243	189	136	84	63
80	0,50 / 0,50	343	245	186	147	118	554	426	319	237	181	137	113
80	0,60 / 0,60	363	265	206	158	125	569	443	336	260	194	147	121

*The measurements have a coefficient f < L/200 and breaking point measurements have a protection coefficient 2.5.
*1daN/m² = 1,02 kp/m²

Technical Data

TECHNICAL CHARACTERISTICS INSOTHERM SFPU
ThicknessS	Thermal TransmittanceS		Polyurethane Density	Panel WeightSteel Thickness 0,5 + 0,5 mm

mm	Kcal/m²h°C	Wm²K	kg/m³	kg/m²
40	0,43	0,50	42	10,18
50	0,34	0,39	42	10,60
60	0,29	0,34	42	11,02
80	0,22	0,26	42	11,86
100	0,17	0,21	42	12,70

Materials

Steel sheets:

Hardness: 300 MPa, with yield stress 335-380 N/mm2
Total plate thickness 0,40mm – 1,00mm (EN 10142/00)
Hot-dipped aluminum/zinc-silicon-coated (55%Al – 43.5%Zn – 1.5%Si) Zincalume® S 320GD AZ150 (EN 10147/00 & EN 10142/00)
Organic polyesteric furnace paint Colorbond® XRW (EN 10169-2/99) )
Flexible coating: Aluminum sheet, kraft paper, paper aluminum, reinforced plasticized paper, tarpaper

Polyurethane:

Density:	40-42 Kg/m³ (ISO 845
Thermal conductivity coefficient:	λ=0,020 W/mK or λ=0,018 Kcal/mhºC at 10ºC (ASTM C 518)
Crushing strength at 10% compression:	0,22 N/mm² (ISO 844)
Adhesion:	0,12 N/mm² (ASTM D 162)
Fire resistance:	B2 Class (DIN 4102)
Dimensional stability:	(ISO 2796)

Dimensions:

Width (effective): 1.000mm

Length (upon request): 2.000mm – 13.600mm

Thickness mm: 30/ 40 / 50 / 60 / 80

Colors:

Additional Features

On customer demand and upon consultation concerning the minimum production quantities and the delivery deadlines, the Insotherm WPU and Insotherm SFPU panels can be manufactured with plates of different hardness, thickness and type, such as prepainted aluminum, copper, stainless steel as well as with different final coatings depending on the particular requirements of the project.